For More Details Call Us : +91-9890194446
 

 

Air Heaters

Air Heater Bank For Paint Drying Applications

Water Heating Elements

 http://www.rashmiheaters.com/images/water-heating-elements.jpg

Water heating elements come in different categories:


Cat No.
Watts VOLT DEPTH OF IMMERSION A
919201/919317 1000 W 230 230/120 mm
9192021919318 1500 W 230 230/150 mm
919203/919315 2000 W 230 325/200 mm
919204/919316 3000 W 230 425/325 mm
Note.: can also be supplied without cap & checkout.


Oil Heaters


Indirect Oil Heater with Outer Tube Finned
Indirect Oil Heater with Outer Tube Finned
Indirect Oil Heater with Outer Tube Finned
Indirect Oil Heater with Outer Tube Finned
   
Oil Outflow Heater of Indirect Type , Range 2KW to 120KW
Oil Outflow Heaters
Oil Outflow Heater of Indirect Type, 
Range 2KW to 120KW
Oil Outflow Heaters
   
Shaft Insulator Heater for ESP Application
Oil Pre Heater for Oil Fired Boiler
Shaft Insulator Heater for ESP Application
Oil Pre Heater for Oil Fired Boiler
   
Oil Circulation Heater
Oil Heater for Steel mills
Oil Circulation Heater
Oil Heater for Steel mills
   
   
   
Customaries Oil Heater
Oil Outflow Heaters with Control Panel
Customaries Oil Heater
Oil Outflow Heaters with Control Panel
   
Alkaline Heating Elements, Titanium Heating Elements (Chemical Heating Elements ), Lead Covered Heating Elements

http://www.rashmiheaters.com/images/alkaline-heating-elements.jpg


CAT NO SHEATH APPLICATION WATTS VOLTAGE
921612 (SS) 304 ALKALINE 3000 W   250 V
*921613 (SS) 304 ALKALINE 2000 W 230 V
922719 TITANIUM   CHEMICAL  3000 W 250 V
922981 LEAD(SS) ACID 3000 W 250 V
* WILL BE MANUFACTURED ON REQUEST



D-Type Heating Elements

D-Type Heating Elements

CAT NO RATING VOLTS DIM 'L' Equivalent Inch
D 50 W 06 450 W 240 150 mm  (6")
D 50 W 08 500 W 250 203 mm (8")
D 50 W 09 550 W 240 229 mm   (9")
D 60 W 10 600 W 250 254 mm   (10")
D 75 W 11 750 W 250 279 mm (11")
D 75 W 12 750 W 250 305 mm   (12")
D 10 K 13 1000 W 240 330 mm  (13")
D 10 K 14 1000 W 240 355 mm  (14")
D 10 K 16 1000 W 240 406 mm  (16")
D 13 K 16 1300 W 240 406 mm  (16")
D 10 K 18 1000 W 240 457 mm  (18")
D 15 K 18 1500 W 240 457 mm  (18")
D 15 K 20 1500 W  240 508 mm (20")
D 10 K 20 1000 W  240 508 mm (20")
D 10 K 24 1000 W 240 610 mm  (24")
D 15 K 24 1500 W 240 584 mm (24")
D 20 K 29 2000 W 240 737 mm  (29")
D 20 K 31 2000 W 240 787 mm  (31")
D 20 K 36 2000 W 240 914 mm  (36")
D 25 K 39 2500 W 240 990 mm (39")


Surface Range for Hot Plates

Surface Range for Hot Plates

Surface Range for Hot Plates

CAT NO SHEATH  WATTS   VOLTS    DIM
D 210 R6 INCOLOY  1250 W 240  6"
D 211 R7  INCOLOY  2000 W 250 7"
D 212 R8  INCOLOY 2000 W 240 8"




Strip heaters:

Strip Heaters (Refractory Insulated) :- These heaters are made of high grade Heating resistance wire element  supported in Fluted Refractory, which is sheathed in rust resisting steel. End-tab holes are provided  for mounting.
Uses :- Provides black heat in ovens, Industrial and commercial heating chambers converters & panel boards

Type No. Length Width Thick Fixing Holes 
Cen to Cen
Load 230 V
STRIP HEATERS Popular Model (Refractory Insulated)
SER - 12 305 mm 38 mm 9.5 mm 280 mm 500 W
SER - 15 380 mm 38 mm 9.5 mm 355 mm 500 W
SER - 18 457 mm 38 mm 9.5 mm 432 mm 750 W
SER - 21 533 mm 38 mm 9.5 mm 508 mm 1000 W
SER - 24 610 mm 38 mm 9.5 mm 585 mm 1000 W
SER - 27 685 mm 38 mm 9.5 mm 660 mm 1000 W
SER - 30 762 mm 38 mm 9.5 mm 735 mm 1500 W
SER - 36 915 mm 38 mm 9.5 mm 890 mm 2000 W
STRIP HEATERS Heavy Duty Model (Refractory Insulated)
SEHD - 12 305 mm 45 mm 11 mm 280 mm 500 W
SEHD - 15 380 mm 45 mm 11 mm 355 mm 500 W
SEHD - 18 457 mm 45 mm 11 mm 432 mm 750 W
SEHD - 21 533 mm 45 mm 11 mm 508 mm 1000 W
SEHD - 24 610 mm 45 mm 11 mm 585 mm 1000 W
SEHD - 27 685 mm 45 mm 11 mm 660 mm 1000 W
SEHD - 30 762 mm 45 mm 11 mm 735 mm 1500 W
SEHD - 36 915 mm 45 mm 11 mm 890 mm 2000 W
STRIP HEATERS For Panel Board (Refractory Insulated)
SER - 09 - SP 228 mm 38 mm 9.5 mm 203 mm 40 W, 60 W, 
100 W
SER -12 - SP 305 mm 38 mm 9.5 mm 280 mm 40 W, 60 W, 
100 W, 250 W

Finned strip heaters;

Finned Strip Heaters :- This is Basically a Heavy Duty Refractory insulated strip heater with locked on finns for fast transfer of heat to air.

Uses :- In forced air ducts, blowers units, ovens, dryers etc. Preferably Horizontal Mounting.


Type No.
Length Thick Width Holes Centre Load 230 V
SERF-9 228 mm (09") 35 mm 65 mm 203 mm 500 W
SERF-12 305 mm (12") 35 mm 65 mm 280 mm 500 W/750 W
SERF-15 380 mm (15") 35 mm 65 mm 355 mm 500 W/750 W 
/1000 W
SERF-18 457 mm (18") 35 mm 65 mm 432 mm 500 W/750 W 
/1000 W
SERF-21 533 mm (21") 35 mm 65 mm 508 mm 1000 W/1250 W
SERF-24 610 mm (24") 35 mm 65 mm 585 mm 1000 W/1250 W
  /1500 W
SERF-27 686 mm (27") 35 mm 65 mm 661 mm 1000 W/1500 W
  /2000 W
SERF-30 762 mm (30") 35 mm 65 mm 737 mm 1000 W/2000 W
  /3000 W
SERF-33 838 mm (33") 35 mm 65 mm 813 mm 2000 W/2500 W
  /3000 W
SERF-36 915 mm (36") 35 mm 65 mm 890 mm 2000 W/3000 W
SERF-42 1066 mm (42") 35 mm 65 mm 1041 mm 3000 W
SERF-48 1220 mm (48") 35 mm 65 mm 1195 mm 3000 W/3500 W
  /4000 W

High Density Cartridge Heaters:

High Density Cartridge Heaters :- These are Made of Heating Conductor grade Ni-Cr 80:20 is evenly wound on a supporting mgo core, which is co centrally placed in a Chrome- Nickel Steel tube after which the inner vacant space is filled with specially selected high purity magnesium oxide powder. This assembled unit is then highly compressed in a SPM, thus converting the core, powder and conductor into one homogenous mass. The bottom end of the heater is welded with a disc washer for prevention against contamination.
Uses:

  1. Packaging Industry
  2. Marking & Sealing Machinery
  3. Hot Runner Bushings
  4. Medical & Laboratory Apparatus
  5. Shoe Making Industry
  6. Die and platens
  7. 3-D Printers

MAIN FEATURES :

  1. Min Dia: 1/4” & 6 mm
  2. Max Dia: 1” & 32 mm
  3. Min length: 1½” & 40 mm
  4. Max length: 40” & 1000 mm
  5. Standard Sizes Available
  6. Various Watt Density option available
  7. Available with in-built Thermocouple
  8. Highly Non-corrosive
  9. Even heat profile & Max temp up to 750°C
  10. High Purity Magnesium Oxide
  11. Superior Life Expectancy
  12. Available with various Lead Exits & Cable Protection options
High Density Cartridge Heaters:


High Density Coil Heaters :- Girish-heat’ brand Coil heaters are designed and manufactured with advanced concept of thermal engineering which has a construction similar to high watt density cartridge heaters. These heaters are also known as high performance tubular heaters or cable heaters. The basic construction of these heaters consists of compacted MgO, high temperature resistance wire and Chrome Nickel Steel tube. These heaters can be constructed with or without built in thermocouples.

  1. Standard sizes available with various cross section
  2. Various Watt Density option available
  3. Designed for even heat profile
  4. Precision fit on Hot Runner Nozzles
  5. Highly Non-corrosive

Uses:

  1. Packaging Industry 
  2. Marking & Sealing Machinery
  3. Hot Runner Bushings
  4. Medical & Laboratory Apparatus
  5. Shoe Making Industry
  6. Die and platents

Space Heaters:




Capillary Thermostats (As per IS - 4165)

Application:

This instrument keeps constant within the differential the temperature of any fluid or solids heated by electricity, gas or oil. It is used in Washing machines, Coffee vending machines, Dishwashers, flyers, Electric cooker, Hot water appliances, Ind. Boilers, Grills, Ovens, Deep fryer, cooking range, storage heater, oil Burners, sterilizer Roaster, Dryers, Oil bath, water bath incubation other domestic and industrial equipments, plastic molding machine, kitchen equipments & Laboratory instrument etc.



Sealing Machines

Continuous Band Sealers

To seal pre filled flexible bags

Hand Operated Sealers

Hand operated sealing machines

Foot Operated Sealers

Foot operated Impulse / Hot bar sealers

Induction Sealing machines

Are used for hermetically sealing plastic / glass bottle caps with Alu foils

Pneumatic Sealers

Pneumatic sealers for heavy bags sealing

Mobile Sealers

Mobile sealers are hand operated sealers for heavy and bulk bags

Foil Sealers

Foil Sealers are for sealing of Aluminium foils over bottle caps, cups, trays etc.

Automatic Impulse Sealer

Automatic Impulse Sealer



 
   Products
Copyright © All rights reserved. Website Designed and Developed by  INDIACOM